Authors must read-through/follow the following criteria carefully before submitting your manuscript for publishing.
1) Article Types
IQJAP seeks to publish experimental and theoretical research results of outstanding significance in the form of original research articles, review articles, conference papers, and perspective/commentary articles. It is the authors’ responsibility to define his/her/their article as the appropriate type and comply with the corresponding general criteria as described below. Failure to do so might result in acceptance delays or rejection.
1) Empirical research articles: Articles represent in-depth original research in any architectural/planning discipline and are classified as primary literature. They are generally structured into an introduction and hypothesis, background, methods, results, interpretation of findings, and a discussion of possible implications, and conclusions/recommendations. Articles should be 4000-6000 words in length and a maximum of 15 pages (excluding abstracts, but including tables, figures, appendices and references).
2) Review article: Review articles give an overview of existing literature in a field, often identifying specific problems or issues and analyzing information from available published work on the topic with a balanced perspective. They are considered secondary literature and can be a particularly efficient way for early career researchers to begin publishing. They are generally structured into an introduction and aims, background study, methods, discussion including interpretation of findings, and conclusions. Articles should be 4000-6000 words in length and a maximum of 15 pages (excluding abstracts, but including tables, figures, appendices and references).
3) Conference papers: conference papers that fall into one of the above types of articles, namely Original research articles and Review articles, could also be accepted in IQJAP. These papers should have been orally presented in an eligible academic conference within a year from the submission date to IQJAP and be 2500-6000 words in length (excluding abstracts but including tables, figures, appendices and references).
4) Perspective/Commentary articles: Both of these types are considered secondary literature and should be no more than 3000 words in length and no more than 10 pages (excluding abstracts, but including tables, figures, appendices and references) to be accepted for submission in IQJAP. Generally, perspective articles are scholarly reviews of fundamental concepts or prevalent ideas in a field that present a personal point of view critiquing widespread single notion or multiple related notions pertaining to a field. While, commentaries are short articles that draw attention to or present a criticism of a previously published article, book, or report, explaining why it interested them and how it might be illuminating for readers.
In all cases, Authors are urged to be succinct; long papers with many tables and figures may require reductions prior to being processed or accepted for publication.
2) Writing Format and Structure
The original manuscript should be formatted with single line spacing using Simplified Arabic font for articles written in Arabic or Times New Roman font for articles written in English. The text must be in a single-column format on A4 papers with margins of 1” (2.54cm) all over. All manuscript pages must be numbered at the bottom center of each page.
The typical structure of an article is described in the Article Types section. It generally contains the following sections: Title page (Contains Article Title, Author(s) data, Abstract, and Keywords), Introduction, Material and methods (Experimental or Methodology and methods), Results, Discussion (Results and discussion can be combined in one section), Conclusion, Acknowledgment(s), and References. Below is a description of what is generally expected in each of the manuscript sections:
1) Title page: The title page should be a single page at the beginning of the manuscript. A translation of the title page in the opposite language, i.e. English if the main manuscript is written in Arabic and vice versa, should be placed at the end of the manuscript. Both the Title Page and the translation should include the following:
a) Title: The title should be brief, concise, and descriptive and no longer than 250 characters. It should not contain any literature references or compound numbers or non-standardized abbreviations. It should be placed in the upper center of the page and be written in bold (16 PT) font.
b) Authors and affiliations: Supply given names, middle initials, and family names for complete identification. Use superscript lowercase letters to indicate different affiliations, which should be as detailed as possible and must include department, faculty/college, University, city with zip code or P.O. Box and country. Author(s) names and affiliation should be written in bold (14 PT) font.
c) Corresponding author: Should be indicated with an asterisk “*”, and contact details (Tel., fax, and email address) should be placed in a footnote.
d) Abstract: Provide an abstract of no more than 400 words. The abstract should briefly describe the purpose of the study, how the investigation was performed, the most important results and the principal conclusions that were drawn from the results, respectively. References should be avoided, but if essential, then cite the author(s) and year(s). Nonstandard or uncommon abbreviations should be avoided, but if essential, be defined at first mention within the abstract. The abstract should be written in regular (12 PT) font.
e) Keywords: Authors are asked to provide (4 to 7) keywords, separated with comma “,”. These keywords are used for indexing purposes and should be written in regular (12 PT) font.
2) The body of the Manuscript: The body of the article is the most important part of an article. It should be written in regular (12 PT) font, while using bold face, italics, subscripts, and superscripts identify titles, subtitles, quoted text and details where appropriate. Use continuous title numbering throughout the Body of the Manuscript using the following style:
1. Title 1
1.1. Second title 1
1.1.1. Third title 1
1.1.2. Third title 2
1.2. Second title 2
2. Title 2
All figures, diagrams, tables and photos should be numbered and appear in their corresponding places within the body of the manuscript. All citations should be written in English using Harvard Referencing System according to “CBE style Manual Committee, 1983”. i.e. using Author’s Name, followed by the Year of Publication, and finally the Page Number between two brackets like (Kahachi, 2013, p. 120). If there is more than one author of the cited work, then use the First Author’s name followed by “et al” like (Kahachi et al, 2017, p. 15).
In general, the Body of the Manuscript consists of the following parts:
a) Introduction: The author(s) should strive to define the significance of the work and the justification for its publication. Any background discussion should be brief and restricted to pertinent material.
b) Material and methods (Experimental or Methodology and methods): Authors should be as concise as possible in experimental descriptions. The experimental section must contain all of the information necessary to guarantee reproducibility. Previously published methods should be indicated by a reference and only relevant modifications should be described. All vendor details, including company, city, and country, should be mentioned for chemicals, reagents, strains, etc. For statistical analysis, please state the appropriate test(s) in addition to hypothesized p-value or significant level (for example 0.05).
c) Results: The study results should be clear and concise. Restrict the use of tables and figures to depict data that is essential to the message and interpretation of the study. Do not duplicate data in both figures and tables. The results should be presented in a logical sequence in the text, tables and illustrations.
d) Discussion: This should explore the significance of the results of the work, not repeat them. Include in the discussion the implications of the findings and their limitations, how the findings fit into the context of other relevant work, and directions for future research.
e) Conclusion(s): The main conclusion(s) of the study should be presented in a short conclusion statement that can stand alone and be linked with the goals of the study. State new hypotheses when warranted. Include recommendations when appropriate. Unqualified statements and conclusions not completely supported by the obtained data should be avoided.
3) Acknowledgements: Please acknowledge individuals/companies/institutions who have contributed to the study, as well as entities providing financial support
4) References: the Iraqi Journal of Architecture and Planning uses Harvard Referencing System according to “CBE style Manual Committee, 1983”. Thus, all references should be listed alphabetically, and be written Harvard-style in English (Roman letters) despite the original language of the reference. For more details about Harvard Style of referencing, please check Appendix 1: Reference’s Guidelines/Examples section at the end of this guide.
In the case of references written in languages other than English, then use the verbal translation followed by vocal translation/pronunciation in brackets, and put the original language of the reference between two square brackets. Below are examples of this referencing method:
- AHMAD, M. A. H. 2004. Studies in Islamic culture (Dirasat fe Al-thaqafa Al-Islamia) [Arabic], Egypt, Lebanon and Iraq, Dar-Al-Fikr.
- B.L.A., Baghdad Local Authority. 2009. Ten by Ten project in Sader City (Mashro'a Ashra-fe-Ashra fe madinat al-sader) [Arabic]. Main article [Online]. Available: http://www.amanatbaghdad.gov.iq/ [Accessed on April 5, 2012].
5) Appendices: the Iraqi Journal of Architecture and Planning encourages authors to limit the number of appendices in their articles. However, in the case that there is a necessity for adding appendices to the article, it should be placed at the end of the manuscript with their reference(s) in their correspondent footnote section. It is important to understand that all the pages used by the appendices will be counted towards the total number of the pages of the manuscript.
3) Units and abbreviations
All measurements and data should be given in SI units where possible (Meters, Kilogram, second…etc.), or in other internationally accepted units in parentheses throughout the text. Figures and Tables should use conventional units, with conversion factors given in legends or footnotes.
The preferred forms for some of the more commonly used abbreviations are mp, bp, C, K, min, h, mL, μL, g, mg, μg, cm, mm, nm, mol, mmol, μmol, M, mM, μM, ppm, HPLC, TLC, GC, 1H NMR, GCMS, HRMS, FABHRMS, UV, IR, EPR, ESR, DNase, ED50, ID50, IC50, LD50, im, ip, iv, mRNA, RNase, rRNA, tRNA, cpm, Ci, dpm, Vmax, Km, k, t1/2.
All non-standard abbreviations should be defined following the first use of the abbreviation.
Manuscripts must be written in either English or Arabic language in a clear and concise manner. Any author who is not fluent in the language used in the manuscript is urged to seek assistance with manuscript preparation prior to submission. To avoid unnecessary errors, the authors are strongly advised to use the "spell-check" and "grammar-check" functions of their word processing software.
Reviewers are not expected to correct grammatical errors and any deficiency in this area may detract from the scientific content of the paper and result in acceptance delays or rejection.
5) Ensuring Unbiased Review
The Iraqi Journal of Architecture and Planning uses Double-blind reviewing process, which means that both author name(s) and reviewer name(s) are concealed from each other throughout the review. To facilitate this, it is the author(s) responsibility to ensure that their manuscript is prepared in such a way that they do not reveal their identities to reviewers, either directly or indirectly. Therefore, authors should do the following checks on all sections of the manuscript before submission (with exception of the title page and acknowledgement as they will remain hidden from reviewers):
1- Please remove any identifying information, such as authors' names or affiliations, from your manuscript before submission.
2- Use the third person to refer to work the authors have previously published. For example, write ‘Black and Hart (2015) have demonstrated’ rather than ‘we/the authors have previously demonstrated (Black & Hart, 2015)’.
3- Make sure that figures and tables do not contain any reference to author affiliations.
4- Exclude acknowledgements and any references to funding sources. Use the title page, which is not sent to reviewers, to detail these and to declare any potential conflicts of interest to the Editor.
Choose file names with care, and ensure that the file’s ‘Properties’ are also anonymized. If you are using Office 2007 or later, consider using the Document Inspector Tool prior to submission.